• Skip to primary navigation
  • Skip to main content
  • Skip to primary sidebar

Go Stapling

Staplers and More

  • Home
  • Staplers
  • Staple Guns
  • Staple Removers
  • Nail Guns
  • Resources

Brad Nails vs Finish Nails

November 24, 2021 By Andrew Morgan Leave a Comment

It can be a bit difficult to choose between a finish nail and a brad nail especially when you want precise nailing. However, it is important to note the differences between these two nails. A brad nail has a smaller gauge compared to a finish nail, which makes it suited for detail work. On the other hand, a finish nail also has a small gauge but they are stronger than brad nails and they have more holding power.

[Read more…] about Brad Nails vs Finish Nails

Filed Under: Resources

Hammer Tacker vs Staple Gun

November 24, 2021 By Andrew Morgan Leave a Comment

When you do lots of DIY projects and you deal with fabric often, then you will need a good stapler for fastening tasks. A staple gun can be used for such tasks, but you can also use a hammer tacker. These tools may be used for different projects, such as securing carpet padding, poster boarding, screening, fencing, fabric, and ceiling tile. The two can also be used on wire and weather stripping.

[Read more…] about Hammer Tacker vs Staple Gun

Filed Under: Resources

Why do Staplers have Two Settings?

October 13, 2021 By Andrew Morgan Leave a Comment

Many people who use common office staples do not give them much thought. As long as the stapler is working well, fastening papers together, or attaching flyers to bulletin boards, minimal attention is offered to them. However, having a closer look at the anvil or the strike plate, you will notice that there are two types of grooves.

The presence of the two types of grooves is because the base plate is reversible. This means that you can rotate it to change which groove should be hit by the staple wire when it comes through the stack of paper you are fastening together. This article will discuss in detail the two settings of a stapler.

[Read more…] about Why do Staplers have Two Settings?

Filed Under: Resources

Crown Stapler vs Brad Nailer

October 13, 2021 By Andrew Morgan Leave a Comment

Overview of Crown Stapler

Crown staplers use staples to fasten things together. Crown staples come in different sizes, in terms of the width of the crown and gauge of the staple. Normally, crown width is referred to as wide, medium, and narrow. The width of the staple crown together with the width and length of the staple legs help to establish holding power. The larger, the heavier duty the staple.

[Read more…] about Crown Stapler vs Brad Nailer

Filed Under: Resources

Brad Nailer vs Finish Nailer

October 13, 2021 By Andrew Morgan Leave a Comment

Brad nailers and finish nailers are very similar on the surface. Both offer accuracy and precision compared to bulk nailing. For instance, finish nailers are used at the end of your projects as opposed to using them all through. Nonetheless, both nailers have different uses and roles.

[Read more…] about Brad Nailer vs Finish Nailer

Filed Under: Resources

  • « Go to Previous Page
  • Go to page 1
  • Go to page 2
  • Go to page 3
  • Go to page 4
  • Go to page 5
  • Go to page 6
  • Go to Next Page »

Recent Posts

  • Long reach stapler and its Application
  • How to Load Brads in a Stanley Staple Gun
  • Wide crown stapler Functions and its Application
  • Ring Shank Nails and its Function
  • What is Cap stapler and its Use

Staple Remover

Best heavy duty Staple removers

Best Heavy Duty Staple Remover Reviews

Heavy-duty staple removers work best for removing staples from cardboard, wooden crates, and plastic boxes. They are mainly made up of metals and are strong enough for removing larger staples. There are different types of staple removers based on their design. Stapler removers comprise of blades, torsions springs, pin axles, and plastic grips. The teeth-like […]

staple remover

Best Staple Removers Reviews

Stapling is quite important to bind things together but sometime it doesn’t go accordingly and you just need to remove the staples you just drove in. Maybe it’s the wrong set of documents or you miss our some pages, or you just need those stapled documents to scan them separately. Whatever the reason is you […]

Feature Posts

long reach stapler

Long reach stapler and its Application

Have you ever used a stapler to staple promotional materials such as booklets or documents only to realize that you are doing a shoddy job? Or perhaps the stapler that you were using was not up to par? Several office staplers can come in handy for average documents, but the only option left would be […]

stanley staple guns

How to Load Brads in a Stanley Staple Gun

Stanley staple gun is a two-in-one electric staple gun that can be used if you have different projects. The tool functions as a staple gun that uses heavy-duty staples. Also, it can be used as a nail gun. It uses ½ inch, 9/16 inch, or 5/5 inch brads. The Stanley staple gun has an extension […]

wide crown stapler

Wide crown stapler Functions and its Application

Many people consider a staple as a typical wire which punches via many sheets of crimps and papers while holding them together. DIY workers also use these staples for large or small makeovers for other household purposes. It is essential to comprehend different staple parts to make a wise decision before purchasing a versatile fastener.                                                                                                           […]

  • About
  • Amazon Affiliate Disclosure
  • Privacy Policy
  • Terms of Services
  • About
  • Amazon Affiliate Disclosure
  • Privacy Policy
  • Terms of Services

Copyright © 2023 — Go Stapling • All rights reserved.